- This topic has 17 replies, 6 voices, and was last updated 1 year, 9 months ago by
.
-
Posts
-
-
The Sky Soaring Open Glider Network (OGN) receiver is up and operational. We have the equipment for another receiver in Beloit WI to be installed in the spring to enlarge our coverage. Windy City has their receiver up and is planning on another installation near Rochelle. This should provide real-time coverage over our typical cross country area to the north, south and west.
OGN will allow us to track suitable equipped aircraft that have FLARM, ADS-B or (inexpensive) OGN transmitters. You can monitor OGN traffic – mostly this time of year in Europe, South America, and southern Africa – at live.glidernet.org, http://www.gliderradar.com and other sites. <cite class=”iUh30 tjvcx” role=”text”></cite>You can learn more about OGN by watching the video at https://www.youtube.com/watch?v=0RITXaCFxGM or the presentation at http://aviation.derosaweb.net/presentations/#ogn.
I am looking for a used desktop computer, and hopefully a monitor, to put in the SE corner of the hangar so that everyone can see our ships at a glance. We do have one OGN transmitter at this time which might go into either the tow plane or the Krosno. OGN transmitters are about $50 apiece so if anyone is interested in donating the cost to the club to add others to other gliders like the PW-5.
My ultimate goal is to help during operations for us to see where our gliders (club and privately owned) are plus our tow plane – not to mention gliders from other clubs. This is partially for safety, partially to keep track of our ships while flying nearby, AND to give everyone a bird’s eye view of how our cross country pilots are doing in an effort to spur interest in longer flying distances.
Thanks, John “OGN” DeRosa
-
Hello:I do not have a computer to donate but I am willing to purchase a Blink camera and controller so that we can augment our Foscam camera system that is almost impossible to view on a cellphone. Having 1 or 2 extra cameras that show “ops or no ops” and adding easy to view security video is beneficial to the club. Any comments/thoughts? Regards,Rich
-
-
-
Hello:
No, the Foscam is not friendly with iPhones either. All we need is 1 camera that shows an overview so we know at a glance that there is an op and/or if someone is at the glider side of the field. The camera and the OGN output together may be the answer see if there are ops and what kind of flights are occurring (cross country or just local training flights). I also would like for one of our seasoned soaring pilots to offer tips to me for soaring a bit further away than I have been used to.
Regards,
Rich
-
-
Steve,
My plan is to semi-permanently mount the small unit with velcro somewhere in the glider with a direct connection to ship’s power.The OGN transmitter auto-powers up once the master switch is turned on so no pilot interaction would be needed. Simple.So I think that after some trial runs in the spring we might decide to buy one or more units and install them in appropriate gliders.John H DeRosa
On Sunday, February 5, 2023 at 03:20:10 PM CST, SSI <webmaster@skysoaring.com> wrote:
-
John. I buy one so I can take it to Caesar Creek. They have the system installed there also.
Steve
From: SSI <webmaster@skysoaring.com>
Sent: Sunday, February 5, 2023 5:39 PM
To: Smsrsnyder@comcast.net
Subject: Reply To: OGN Computer Needed; By John DeRosa, [Sky Soaring] -
Hello. I have MB with AMD FX processor, with either 16 or 32 MB memory (not sure). I have HDD, graphic card and power supply too. Also have legal installation disk with Windows 7. Only need chassis, monitor, keyboard, mouse.
From: SSI [mailto:webmaster@skysoaring.com]
Sent: Sunday, February 05, 2023 12:48 PM
To: petrfolw@comcast.net
Subject: OGN Computer Needed, By John DeRosa, [Sky Soaring] -
One caveat, ….the LilyGo TTgo T-beam module for OGN transmission, (as shown in picture), will not power directly from the 12 volt buss in SSI gliders.A small power “buck-converter” circuit module will also be needed, to bring 12 volts down to about 5 volt to feed into the OGN module…(it has a USB port accepting 5 volts)
-
You can buy self-contained buck converters on-line for $12.
One caveat, ….the LilyGo TTgo T-beam module for OGN transmission, (as shown in picture), will not power directly from the 12 volt buss in SSI gliders.A small power “buck-converter” circuit module will also be needed, to bring 12 volts down to about 5 volt to feed into the OGN module…(it has a USB port accepting 5 volts)
Best Regards,
John F. Phelan
From: SSI <webmaster@skysoaring.com>
Sent: Sunday, February 5, 2023 19:12
To: phelanjf@gmail.com
Subject: Reply To: OGN Computer Needed; By Dennis Burke, [Sky Soaring] -
Some followup comments on putting these OGN transmitters in our aircrafts.
Correct that you must use a voltage converter to go from our 12Vdc battery “bus” (not “buss”) to supply USB level 5Vdc power to the OGN transmitter.The Amazon link for a converter that John P sent earlier was for a USB-C connection. I’d sure like USB-C better but we are stuck with the micro-USB connector on the OGN transmitter. Use this Amazon link instead for a converter https://a.co/d/cb5MLvW.
Best Regards,
John H DeRosa -
-
DeRosa would have a better answer but I don’t think there is anything to charge on the OGN boards. They need aircraft power to run. I don’t see any battery on the board in the photo that DeRosa sent out.
Best Regards,
John F. Phelan
From: SSI <webmaster@skysoaring.com>
Sent: Monday, February 6, 2023 9:57
To: phelanjf@gmail.com
Subject: Reply To: OGN Computer Needed; By Steven Snyder, [Sky Soaring] -
-
OK. So how do we turn it on/off when it is in a glider? DeRosa indicated it will power up with the master switch in the glider but this seems to contradict that.
What am I missing?
Best Regards,
John F. Phelan
From: SSI <webmaster@skysoaring.com>
Sent: Monday, February 6, 2023 14:09
To: phelanjf@gmail.com
Subject: Reply To: OGN Computer Needed; By Dennis Burke, [Sky Soaring] -
John P,
No action on the part of the pilot is needed.The OGN receiver auto powers up as soon as ship’s power is applied.After ship’s power is removed the OGN receiver will turn off – something I remember learning in EE101 college class. If there is a battery installed (not required) the unit will run for a while before dying which also turns the unit off. Thus the universe returns to equilibrium.Sound about right?John H DeRosa(OHM Ω)“Anyone who has never made a mistake has never tried anything new.”– Albert EinsteinOn Monday, February 6, 2023 at 03:25:12 PM CST, SSI <webmaster@skysoaring.com> wrote:
Reply To: OGN Computer Needed From John Phelan, [General Discussion Forum]
OK. So how do we turn it on/off when it is in a glider? DeRosa indicated it will power up with the master switch in the glider but this seems to contradict that.
What am I missing?
Best Regards,
John F. Phelan
From: SSI
Sent: Monday, February 6, 2023 14:09
To: phelanjf@gmail.com
Subject: Reply To: OGN Computer Needed; By Dennis Burke, [Sky Soaring]Unsubscribe from this Topic; https://skysoaring.com/forums/topic/ogn-computer-needed/
Attachments Allowed: msword, excel, pdf, jpeg, bmp, gif, png. 2mb max.
-
-
- The forum ‘Restricted content’ is closed to new topics and replies.